What You Need For Your Kitchen Sink Drain

Whether you have a new sink or you’re replacing an old one, it’s important to consider what you’re going to need for your kitchen drain. You may want to purchase a basket strainer, P-trap or a pipe of the proper size to keep your sink free of clogs.
Cleaning a grease clog

Having a grease clogged kitchen sink can be an inconvenience. Luckily, there are ways to clean it up. The key is to identify the problem.

The classic way to unclog a kitchen sink is by using a plunger. A plunger works well on a small clog, but a bigger clog may require a more thorough approach.

Another solution is to use a long wire hook to loosen up the clog. You may need to disassemble the plumbing under the sink to reach the clog.

If you’re looking for something a bit more advanced, you can try a caustic drain cleaner. These products contain toxic chemicals, but they’re also great at cleaning grease clogs. However, they can also corrode your pipes, making them more expensive to repair.

The best homemade solution is a vinegar and water mixture in a ratio of one to one. The vinegar dissolves the fats and oils that make up the congealed grease, and the water softens it and flushes it out.
Installing a new basket strainer

Adding a new basket strainer for your kitchen sink is a simple process. However, you will want to use the correct materials and tools. These include plumber’s putty, a rubber gasket, and a locknut.

First, you’ll need to remove your current basket strainer. To do this, turn off the water supply and loosen the tailpiece of your faucet. Next, unscrew the locknut from the bottom of the drain basket. The nut is secured by a friction ring. information online can be removed with pliers.

Once you’ve removed the nut, clean off any excess putty from the top of your sink. A damp sponge can be used to wipe away any residue. Candu Plumbing & Rooter announced today may also need to spray the locknut with penetrating oil to prevent it from corrosion.

Once you have a basket strainer that fits, you’ll need to install it. The installation process is similar for both types. For stainless steel sinks, you’ll need to use a lock nut, which allows you to tighten the nut without bending the metal.
Installing a P-trap

Adding a P-trap to your kitchen sink drain is a simple task that requires some knowledge of the plumbing system. It’s important to ensure that the p-trap is installed to the correct height, so that water is able to flow into the drain. This prevents water damage and also keeps toxic sewer gases out of your home.

Before installing a p-trap, clean out the drain. Remove any debris and hair that may have collected in the bend. The pipe will need to be cleaned and inspected to ensure that it is free of build-up. Then, tighten the trap to the appropriate height.


When you’re ready to install a p-trap, connect the wall pipe to the trap. You can do this by hand or by using a wrench. Make sure the ring on the connector is tightened correctly. You don’t want to overtighten it, as it can damage the washer.

Next, connect the tail piece to the trap by placing the slip nut on the end that fits in the trap. If you’re using a push-connect fitting, you can’t use a slip nut.
Choosing the right size pipe

Choosing the right size pipe for your kitchen sink drain is important. The wrong size pipes can lead to clogs and expensive repairs.

A standard size for a kitchen sink drain is 3 1/2 “. This size provides quick drainage of water. However, if you are unsure about how to measure a pipe, it is best to hire a professional plumber for the job. They can help you to comply with the local building codes.

You need to make sure that the kitchen sink drain is compatible with your local plumbing code. In order to do this, you will need to know how to measure the OD and ID of the pipe. You will also need to determine if the pipe is male threaded. If it is, you can measure the outside diameter (OD) and female pipe thread (FPT).

A 1 1/4 “-1/2” diameter pipe is suitable for a bathroom sink drain. The larger pipe will allow for faster water flow. You may also want to consider installing an adapter that allows a wide pipe for a smaller drain outlet.

Candu Plumbing & Rooter
22144 Eccles St, Canoga Park, CA 91304
(855) 522-2638
https://www.canduplumbing.com/